Select Language
Inquiry Basket ( 0 )
Company Details

  •  [Shandong,China]
  • Business Type:Manufacturer , Trade Company
  • Exporter:1% - 10%
  • Certs:ISO9001, CCC
  • Description:Axial Fan,FRP Fan,Stainless Steel Fan


Axial Fan,FRP Fan,Stainless Steel Fan

  • Title
  • All
Home > Products > Axial Flow Fan > Axial Flow Fans FRP Fans Stainless Steel Fan
Online Service

Axial Flow Fans FRP Fans Stainless Steel Fan

Share to:  
Unit Price: USD 300 - 530 / Piece/Pieces
Min.Order Unit Price
1 Piece/Pieces USD 300 / Piece/Pieces
1 Piece/Pieces USD 530 / Piece/Pieces
Payment Type: L/C,T/T
Terms of Trade: FOB
Min. Order: 1
Delivery Time: 30
Basic Info
Model No.:ZL 400B–4C
Certification: CCC, SGS, ISO
Additional Info
Transportation: Ocean,Land,Air
Place of Origin: CHINA
Certificate: IOS 9001 / CCC
Port: Qingdao
Product Description
ZL series Axial Flow Fan is a special fan for air conditioning system developed by our company, which is suitable for ventilation occasions with large flow and low wind pressure. Its fluid model is optimized by CFD advanced technology, which reduces noise and efficiency while increasing output pressure, and has the characteristics of energy saving and low noise, especially suitable for the distribution of various air conditioning, purification, fresh air, HVAC and refrigeration units It is widely used in hotels, hotels, office buildings, houses, schools, hospitals, factories, mines, cinemas, car air conditioners and other fields.
This series of fans have two different types of matching motors: single-phase motor and three-phase motor. You can also customize special matching motors with different voltages and frequencies according to your needs. It is very convenient to apply in different countries, regions and fields.
This series of fans has the following remarkable advantages:
1. The optimized impeller has the advantages of large air volume, small noise, high efficiency and low noise, environmental protection and energy saving;
2. The structure is simple and light, and the installation method is simple;
3. The power of the self-developed matching motor is carefully optimized, and its reliability and service life are better than those of the ordinary motor.
Model description
Typical model: ZL 400 B – 4 C
Model meaning:
ZL: axial fan
400: nominal diameter of impeller (mm)
B: The direction of air outlet is B from the motor to the blade, and there is no such code from the blade to the motor
4: Number of poles of matched motor, in which EC stands for BLDCM
C: Motor power supply, single-phase power supply is C, three-phase power supply does not have this code
work environment
The applicable working environment of this series of fans is:
1) Not more than 1000 meters above sea level;
2) The ambient temperature is not lower than - 25 ℃, not higher than 40 ℃;
3) The relative humidity of the environment shall not exceed 90%;
4) The conveying gas does not contain acid, alkaline and corrosive medium, and the dust content is not more than 150mg / m3.
When the working environment does not meet the above requirements, it needs to be explained when ordering. Our company can make it according to the specific site conditions.
Performance range
Flow: 3200 ~ 9000m3 / h
Total pressure: 100-180pa
Beyond this range, please choose other series of fan products of our company, or contact our company for customization.
Matters needing attention
1. Inspection before use
Before use, please check carefully:
(1) Whether the motor leads are intact;
(2) Whether the bolts are loose;
(3) Check whether there is serious deformation of the shroud, blade, motor shaft and bracket;
(4) Rotate the impeller by hand, the hand induction rotation is stable, and there is no obvious stuck phenomenon.
2, installation
(1) The grounding bolt of the fan shall be connected reliably;
(2) The fan shall be equipped with phase loss and overload protection devices;
3. Start up and operation
(1) Before starting the fan, check the working power supply, which must be within ± 5% of the rated voltage and ± 1% of the rated frequency;
(2) The rotation direction of the fan impeller shall be the same as that of the turning mark;
(3) The operating current of the fan shall not exceed the nameplate current, otherwise the motor will be damaged or burnt;

(4) When the fan is running, it is forbidden to extend the body or foreign matters to the inside of the fan to avoid danger.


Looking for ideal Axial Fan Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the FRP Fan are quality guaranteed. We are China Origin Factory of Stainless Steel Fan. If you have any question, please feel free to contact us.

Product Categories : Axial Flow Fan

Email to this supplier
Other Products
Communicate with Supplier?Supplier
Junsu Zhu Mr. Junsu Zhu
What can I do for you?
Contact Supplier